本特內華達1900/65A通用設備監視器旨在持續監測和保護各種應用和行業中使用的設備。該監視器的低成本使其成為通用機器和過程的理想解決方案，可以從持續監控和保護中受益。

1900/65A提供4個傳感器輸入和4個溫度輸入。軟件可以配置每個傳感器輸入，以支持2線和3線加速度計，速度傳感器或接近傳感器。每個溫度輸入支持E、J、K和T型熱電偶，以及2線或3線rtd。

1900/65A提供6個繼電器輸出，4個4-20 mA記錄儀輸出和一個專用緩沖輸出。用戶可以使用1900配置軟件配置繼電器觸點打開或關閉根據OK，警報和危險狀態的任何通道或通道的組合，并提供數據從任何通道上的任何變量的任何記錄器輸出。專用緩沖輸出可以為每個換能器輸入提供信號。

Modbus®網關選項允許監視器直接向任何Modbus客戶端提供靜態變量，狀態，事件列表，時間和日期信息，包括分布式控制系統(dcs)，監控和數據采集(SCADA)系統，可編程邏輯控制器(plc)或System 1®軟件。監視器使用內部計數器和Modbus客戶端/主時間引用來生成時間和日期信息。用戶可以通過訂購1900/01通信升級(參見訂購信息部分)來升級沒有Modbus網關的監視器。1900/65A支持通過以太網和軟件可配置的RS232/485串口進行Modbus通信。

用戶使用在筆記本電腦或PC機上運行的軟件創建配置文件，并通過內置的以太網連接將配置文件下載到監視器上，從而定義監視器操作和Modbus Gateway寄存器映射。1900/65A將配置信息存儲在非易失性存儲器中，并可以將這些信息上傳到PC以進行更改。

1900/65A支持一個可選的顯示/鍵盤來查看通道信息或進行較小的配置更改。這允許1900/65A作為一個獨立的包操作。如果需要，用戶可以將顯示器安裝到距離監控模塊75米(250英尺)的地方。

The Bently Nevada 1900/65A General Purpose Equipment Monitor is designed to continuously monitor and protect equipment that is used in a variety of applications and industries. The monitor’s low cost makes it an ideal solution for general-purpose machines and processes that can benefit from continuous monitoring and protection.

The 1900/65A provides four transducer inputs and four temperature inputs. Software can configure each transducer input to support 2- and 3-wire accelerometers, velocity sensors or proximity sensors. Each temperature input supports Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs.

The 1900/65A provides six relay outputs, four 4-20 mA recorder outputs, and a dedicated buffered output. The user can use the 1900 Configuration software to configure the relay contacts to open or close according to the OK, Alert and Danger statuses of any channel or combination of channels, and to provide data from any variable from any channel on any recorder output. The dedicated buffer output can provide the signal for each transducer input.

A Modbus® Gateway option allows the monitor to provide static variables, statuses, event list, time and date information directly to any Modbus client, including Distributed Control Systems (DCSs), Supervisory Control and Data Acquisition (SCADA) systems, Programmable Logic Controllers (PLCs), or System 1® software. The monitor uses an internal counter and a Modbus client/master time reference to generate time and date information. Users can upgrade monitors without the Modbus Gateway by ordering the 1900/01 Communications Upgrade (see the Ordering Information section). The 1900/65A supports Modbus communications via Ethernet and a software-configurable RS232/485 serial port.

The user defines monitor operation and the Modbus Gateway register map by using software running on a laptop or PC to create a configuration file and download the file to the monitor through the built-in Ethernet connection. The 1900/65A permanently stores configuration information in non-volatile memory, and can upload this information to the PC for changes.

The 1900/65A supports an optional display/keypad to view channel information or make minor configuration changes. This allows the 1900/65A to operate as a stand-alone package. If desired, the user can mount the display up to 75 metres (250 feet) from the Monitor Module.