
主要用途和適用范圍:
FOS-G-07型全自動光學檢驗機是透過玻璃盤面,對產品上下面同時進 行檢測,適用于磁性材料、電子器件、螺絲、螺帽、緊固件、橡膠圈、 粉末冶金等各種產品的尺寸及外觀檢測。
檢測項目
序號 | 名稱 | name |
1 | 直徑、孔徑 | Diameter and aperture |
2 | 長度 | Length |
3 | 寬度 | Width |
4 | 高度、厚度 | Height and thickness |
5 | 表面瑕庇 | Surface defect |
6 | 變形、破損 | Deformation and damage |
7 | 外觀形狀不同 | Appearance difference |
8 | 破裂 | Fracture |
9 | 毛邊 | Rough edge |
10 | 倒角角度 | Chamfer angle |
11 | 夾角 | Included angle |
12 | 圓孤半徑 | Circular arc radius |
13 | 偏心 | Eccentricity |
14 | 真圓度 | Roundness |
15 | 有無電鍍 | Whether there is plating |
16 | 有無印記 | Whether there is marking |
17 | 有無割尾 | Whether there is end-cutting |
18 | 平行邊 | Parallel edge |
檢測精度:± 0.005mm
CCD數呈可以依實際需求選配,本檢測機配備4支CCD 檢測速度依尺寸不同而定,一般產品300-500片/分鐘 機臺:電壓220V, 60Hz,單項,氣壓6Kg
所有評論僅代表網友意見,與本站立場無關。